Usb Touch Id For Mac

• Usb For Mac And Pc
• Find Usb Device On Mac
• Mac Usb Keyboard

MacLock costs $1.99, £1.49, AU$2.99 and lets you use Touch ID on your iPhone or iPad or a tap on your Apple Watch to unlock your Mac. You can also shake your iOS device to lock your Mac. Download Android USB Drivers for Windows and Mac Today in this guide we provide the direct link to Download Android USB Drivers for all the latest devices like Google Nexus, LG, HTC, Sony, OnePlus, Samsung, Xiaomi, Moto, etc.

NOTE:

IOS 8 greatly expanded what Touch ID can do. This column will help Mac and iOS users understand the implications of the latest security exploits, privacy hacks, and encryption options, and how. At least one new iPhone released in 2019 will sport a USB-C port, smaller notch, and the return of Touch ID under the display, according to Jean Baptiste Su, Vice-President and Principal Analyst.

Between mid October 2019 and mid February 2020 everyone in the Army was migrated to use their PIV Authentication certificate for Email access. You no longer use the Email certificate for Enterprise Email or any CAC enabled websites

Mac users who choose to upgrade (or already have upgraded) to Mac OS Catalina (10.15.x) will need to uninstall all 3rd Party CAC enablers per https://militarycac.com/macuninstall.htm AND reenable the built in smart card ability (very bottom of macuninstall link above)

If you purchased your Mac with OS Catalina (10.15.x) already installed, you can skip the uninstall part above and follow the instructions below.

6 'high level' steps needed, follow down the page to make this a painless systematic process

Step 1: Is your CAC reader Mac friendly?

Visit the USB Readers page to verify the CAC reader you have is Mac friendly.

Visit the USB-C Readers page to verify the CAC reader you have is Mac friendly.

'Some, not all' CAC readers may need to have a driver installed to make it work.

NOTE: Readers such as: SCR-331 & SCR-3500A may need a firmware update (NO OTHER Readers need firmware updates).

Information about these specific readers are in Step 2

Step 2: Can your Mac 'see' the reader?

Plug the CAC reader into an open USB port before proceeding, give it a few moments to install

Step 2a: Click the Apple Icon in the upper left corner of the desktop, select 'About This Mac'

Step 2b: Click 'System Report...' (button)

Step 2c: Verify the CAC reader shows in Hardware, USB, under USB Device Tree. Different readers will show differently, most readers have no problem in this step. See Step 2c1 for specific reader issues.

Step 2c1: Verify firmware version on your SCR-331 or GSR-202, 202V, 203 CAC, or SCR-3500a reader. If you have a reader other than these 5, Proceed directly to step 3

Step 2c1a-SCR-331 reader

If your reader does not look like this, go to the next step.

In the 'Hardware' drop down, click 'USB.' On the right side of the screen under 'USB Device Tree' the window will display all hardware plugged into the USB ports on your Mac. Look for 'SCRx31 USB Smart Card Reader.' If the Smart Card reader is present, look at 'Version' in the lower right corner of this box: If you have a number below 5.25, you need to update your firmware to 5.25. If you are already at 5.25, your reader is installed on your system, and no further hardware changes are required. You can now Quit System Profiler and continue to Step 3.

Step 2c1b-SCR-3500A reader

If you have the SCR3500A P/N:905430-1 CAC reader,you may need to install this driver, as the one that installs automatically will not work on most Macs. Hold the control key [on your keyboard] when clicking the .pkg file [with your mouse], select [the word] Open

Step 3: Verify which version of MacOS do you have?

(You need to know this information for step 6)

Step 3a: Click the Apple Icon in the upper left corner of your desktop and select 'About This Mac'

Step 3b: Look below Mac OS X for: Example: Version 10.X.X.

Step 4: Figure out which CAC (ID Card) you have

(You need to know this information for step 6)

Look at the top back of your ID card for these card types. If you have any version other than the six shown below, you need to visit an ID card office and have it replaced. All CACs [other than these six] were supposed to be replaced prior to 1 October 2012.

Find out how to flip card over video

Step 5: Install the DoD certificates (for Safari and Chrome Users)

Go to Keychain Access

Click: Go (top of screen), Utilities, double click Keychain Access.app

(You can also type: keychain access using Spotlight (this is my preferred method))

Select login (under Keychains),and All Items (under Category).

Download the 5 files via links below (you may need to click, select Download Linked File As... on each link) Save to your downloads folder

Please know... IF You have any DoD certificates already located in your keychain access, you will need to delete them prior to running the AllCerts.p7b file below.

https://militarycac.com/maccerts/AllCerts.p7b,

https://militarycac.com/maccerts/RootCert2.cer,

https://militarycac.com/maccerts/RootCert3.cer,

https://militarycac.com/maccerts/RootCert4.cer, and

Double click each of the files to install certificates into the login section of keychain

Select the Kind column, verify the arrow is pointing up, scroll down to certificate, look for all of the following certificates:

DOD EMAIL CA-33 through DOD EMAIL CA-34,

DOD EMAIL CA-39 through DOD EMAIL CA-44,

DOD EMAIL CA-49 through DOD EMAIL CA-52,

DOD EMAIL CA-59,

DOD ID CA-33 through DOD ID CA-34,

DOD ID CA-39 through DOD ID CA-44,

DOD ID CA-49 through DOD ID CA-52,

DOD ID CA-59

DOD ID SW CA-35 through DOD ID SW CA-38,

DOD ID SW CA-45 through DOD ID SW CA-48,

DoD Root CA 2 through DoD Root CA 5,

DOD SW CA-53 through DOD SW CA-58, and

DOD SW CA-60 through DOD SW CA-61

NOTE: If you are missing any of the above certificates, you have 2 choices,

1. Delete all of them, and re-run the 5 files above, or

2. Download the allcerts.zip file and install each of the certificates you are missing individually.

Errors:

Error 100001 Solution

Error 100013 Solution

You may notice some of the certificates will have a red circle with a white X . This means your computer does not trust those certificates

You need to manually trust the DoD Root CA 2, 3, 4, & 5 certificates

Double click each of the DoD Root CA certificates, select the triangle next to Trust, in the When using this certificate: select Always Trust, repeat until all 4 do not have the red circle with a white X.

You may be prompted to enter computer password when you close the window

Once you select Always Trust, your icon will have a light blue circle with a white + on it.

The 'bad certs' that have caused problems for Windows users may show up in the keychain access section on some Macs. These need to be deleted / moved to trash.

The DoD Root CA 2 & 3 you are removing has a light blue frame, leave the yellow frame version. The icons may or may not have a red circle with the white x

NOTE:

IOS 8 greatly expanded what Touch ID can do. This column will help Mac and iOS users understand the implications of the latest security exploits, privacy hacks, and encryption options, and how. At least one new iPhone released in 2019 will sport a USB-C port, smaller notch, and the return of Touch ID under the display, according to Jean Baptiste Su, Vice-President and Principal Analyst.

Between mid October 2019 and mid February 2020 everyone in the Army was migrated to use their PIV Authentication certificate for Email access. You no longer use the Email certificate for Enterprise Email or any CAC enabled websites

Mac users who choose to upgrade (or already have upgraded) to Mac OS Catalina (10.15.x) will need to uninstall all 3rd Party CAC enablers per https://militarycac.com/macuninstall.htm AND reenable the built in smart card ability (very bottom of macuninstall link above)

If you purchased your Mac with OS Catalina (10.15.x) already installed, you can skip the uninstall part above and follow the instructions below.

6 'high level' steps needed, follow down the page to make this a painless systematic process

Step 1: Is your CAC reader Mac friendly?

Visit the USB Readers page to verify the CAC reader you have is Mac friendly.

Visit the USB-C Readers page to verify the CAC reader you have is Mac friendly.

'Some, not all' CAC readers may need to have a driver installed to make it work.

NOTE: Readers such as: SCR-331 & SCR-3500A may need a firmware update (NO OTHER Readers need firmware updates).

Information about these specific readers are in Step 2

Step 2: Can your Mac 'see' the reader?

Plug the CAC reader into an open USB port before proceeding, give it a few moments to install

Step 2a: Click the Apple Icon in the upper left corner of the desktop, select 'About This Mac'

Step 2b: Click 'System Report...' (button)

Step 2c: Verify the CAC reader shows in Hardware, USB, under USB Device Tree. Different readers will show differently, most readers have no problem in this step. See Step 2c1 for specific reader issues.

Step 2c1: Verify firmware version on your SCR-331 or GSR-202, 202V, 203 CAC, or SCR-3500a reader. If you have a reader other than these 5, Proceed directly to step 3

Step 2c1a-SCR-331 reader

If your reader does not look like this, go to the next step.

In the 'Hardware' drop down, click 'USB.' On the right side of the screen under 'USB Device Tree' the window will display all hardware plugged into the USB ports on your Mac. Look for 'SCRx31 USB Smart Card Reader.' If the Smart Card reader is present, look at 'Version' in the lower right corner of this box: If you have a number below 5.25, you need to update your firmware to 5.25. If you are already at 5.25, your reader is installed on your system, and no further hardware changes are required. You can now Quit System Profiler and continue to Step 3.

Step 2c1b-SCR-3500A reader

If you have the SCR3500A P/N:905430-1 CAC reader,you may need to install this driver, as the one that installs automatically will not work on most Macs. Hold the control key [on your keyboard] when clicking the .pkg file [with your mouse], select [the word] Open

Step 3: Verify which version of MacOS do you have?

(You need to know this information for step 6)

Step 3a: Click the Apple Icon in the upper left corner of your desktop and select 'About This Mac'

Step 3b: Look below Mac OS X for: Example: Version 10.X.X.

Step 4: Figure out which CAC (ID Card) you have

(You need to know this information for step 6)

Look at the top back of your ID card for these card types. If you have any version other than the six shown below, you need to visit an ID card office and have it replaced. All CACs [other than these six] were supposed to be replaced prior to 1 October 2012.

Find out how to flip card over video

Step 5: Install the DoD certificates (for Safari and Chrome Users)

Go to Keychain Access

Click: Go (top of screen), Utilities, double click Keychain Access.app

(You can also type: keychain access using Spotlight (this is my preferred method))

Select login (under Keychains),and All Items (under Category).

Download the 5 files via links below (you may need to click, select Download Linked File As... on each link) Save to your downloads folder

Please know... IF You have any DoD certificates already located in your keychain access, you will need to delete them prior to running the AllCerts.p7b file below.

https://militarycac.com/maccerts/AllCerts.p7b,

https://militarycac.com/maccerts/RootCert2.cer,

https://militarycac.com/maccerts/RootCert3.cer,

https://militarycac.com/maccerts/RootCert4.cer, and

Double click each of the files to install certificates into the login section of keychain

Select the Kind column, verify the arrow is pointing up, scroll down to certificate, look for all of the following certificates:

DOD EMAIL CA-33 through DOD EMAIL CA-34,

DOD EMAIL CA-39 through DOD EMAIL CA-44,

DOD EMAIL CA-49 through DOD EMAIL CA-52,

DOD EMAIL CA-59,

DOD ID CA-33 through DOD ID CA-34,

DOD ID CA-39 through DOD ID CA-44,

DOD ID CA-49 through DOD ID CA-52,

DOD ID CA-59

DOD ID SW CA-35 through DOD ID SW CA-38,

DOD ID SW CA-45 through DOD ID SW CA-48,

DoD Root CA 2 through DoD Root CA 5,

DOD SW CA-53 through DOD SW CA-58, and

DOD SW CA-60 through DOD SW CA-61

NOTE: If you are missing any of the above certificates, you have 2 choices,

1. Delete all of them, and re-run the 5 files above, or

2. Download the allcerts.zip file and install each of the certificates you are missing individually.

Errors:

Error 100001 Solution

Error 100013 Solution

You may notice some of the certificates will have a red circle with a white X . This means your computer does not trust those certificates

You need to manually trust the DoD Root CA 2, 3, 4, & 5 certificates

Double click each of the DoD Root CA certificates, select the triangle next to Trust, in the When using this certificate: select Always Trust, repeat until all 4 do not have the red circle with a white X.

You may be prompted to enter computer password when you close the window

Once you select Always Trust, your icon will have a light blue circle with a white + on it.

The 'bad certs' that have caused problems for Windows users may show up in the keychain access section on some Macs. These need to be deleted / moved to trash.

The DoD Root CA 2 & 3 you are removing has a light blue frame, leave the yellow frame version. The icons may or may not have a red circle with the white x

If you have tried accessing CAC enabled sites prior to following these instructions, please go through this page before proceeding

Clearing the keychain (opens a new page)

Please come back to this page to continue installation instructions.

Step 5a: DoD certificate installation instructions for Firefox users

NOTE: Firefox will not work on Catalina (10.15.x), or last 4 versions of Mac OS if using the native Apple smartcard ability

Download AllCerts.zip, [remember where you save it].

double click the allcerts.zip file (it'll automatically extract into a new folder)

Option 1 to install the certificates (semi automated):

From inside the AllCerts extracted folder, select all of the certificates

click (or Right click) the selected certificates, select Open With, Other...

In the Enable (selection box), change to All Applications

Usb For Mac And Pc

Select Firefox, then Open

You will see several dozen browser tabs open up, let it open as many as it wants..

You will eventually start seeing either of the 2 messages shown next

If the certificate is not already in Firefox, a window will pop up stating 'You have been asked to trust a new Certificate Authority (CA).'

Check all three boxes to allow the certificate to: identify websites, identify email users, and identify software developers

or

'Alert This certificate is already installed as a certificate authority.' Click OK

Once you've added all of the certificates...
• Click Firefox (word) (upper left of your screen)
• Preferences
• Advanced (tab)
• Press Network under the Advanced Tab
• In the Cached Web Content section, click Clear Now (button).
• Quit Firefox and restart it

Option 2 to install the certificates (very tedious manual):

Click Firefox (word) (upper left of your screen)

Preferences

Advanced (tab on left side of screen)

Certificates (tab)

View Certificates (button)

Authorities (tab)

Import (button)

Browse to the DoD certificates (AllCerts) extracted folder you downloaded and extracted above.

Note: You have to do this step for every single certificate

Note2: If the certificate is already in Firefox, a window will pop up stating: 'Alert This certificate is already installed as a certificate authority (CA).' Click OK

Note3: If the certificate is not already in Firefox, a window will pop up stating 'You have been asked to trust a new Certificate Authority (CA).'

Check all three boxes to allow the certificate to: identify websites, identify email users, and identify software developers

Once you've added all of the certificates...
• Click Firefox (word) (upper left of your screen)
• Preferences
• Advanced (tab)
• Press Network under the Advanced Tab
• In the Cached Web Content section, click Clear Now (button).
• Quit Firefox and restart it

Step 6: Decide which CAC enabler you can / want to use

Only for Mac El Capitan (10.11.x or older)

After installing the CAC enabler, restart the computer and go to a CAC enabled website

NOTE: Mac OS Sierra (10.12.x), High Sierra (10.13.x), Mojave (10.14.x) or Catalina (10.15.x) computers no longer need a CAC Enabler.

Try to access the CAC enabled site you need to access now

Mac support provided by: Michael Danberry

Get started

Lift the lid of your MacBook Pro or MacBook Air to turn it on, or press Touch ID. Every time you start up, restart or log out, you will need to enter your password to log in to your user account. After setting up Touch ID, as long as you're logged in, you can use your fingerprint instead of typing when you're asked for your password.

With Touch ID, you can also use your fingerprint to make purchases from the App Store, Apple Books Store and iTunes Store, as well as from many of your favourite websites using Apple Pay.

MacBook Pro with Touch Bar

On MacBook Pro models with Touch Bar, the Touch ID button is on the right side of the Touch Bar at the top of the keyboard.

13- and 16-inch MacBook Pro models with Touch Bar introduced in late 2019 or later

13- and 15-inch MacBook Pro models with Touch Bar introduced in 2016 through 2019

MacBook Air

On MacBook Air models introduced in 2018 and later, the Touch ID button is on the right-hand side of the function keys.

MacBook Air (2020)

How to set up Touch ID

1. Make sure your finger is clean and dry.
2. Choose Apple menu  > System Preferences.
   
3. Click Touch ID.
   
4. Click the plus sign to add a fingerprint, type your user account password when prompted, then follow the on-screen instructions.
5. Use the checkboxes to select the Touch ID features you want to use on your Mac.

Tips for adding fingerprints:

• Place your finger on the Touch ID button — but don't press it down. Hold it there until you're asked to lift your finger.
• Lift and rest your finger slowly, making small adjustments to the position of your finger each time.
• Add up to three fingerprints.

You can also delete fingerprints:

1. Hover the pointer over a fingerprint. A delete button will appear.
2. Click the delete button, then enter your password to remove the fingerprint.

Use Touch ID to unlock your Mac

After you've set up Touch ID, you can use it to unlock your Mac. Wake up your Mac by opening the lid, pressing any key or tapping the trackpad. Then place your finger lightly on Touch ID to log in.

You must enter your password to log in after you've started up, restarted or logged out of your Mac. When you're logged in, you can quickly authenticate yourself with Touch ID whenever you're asked for your password.

You can also use Touch ID to unlock these features on your Mac:

• Password-Protected Notes
• The Passwords section in Safari preferences
• System Preferences
  If you have FileVault turned on, you must enter your password to unlock the Security & Privacy pane and the Users & Groups pane.
  

If multiple users have set up Touch ID and log in to the same Mac, they can use Touch ID to switch accounts. Just press Touch ID, and your Mac will switch to the logged-in user account associated with the fingerprint.

Make iTunes Store, App Store and Apple Books Store purchases with Touch ID

Use Touch ID instead of your Apple ID password to make purchases on your Mac:

1. Open the iTunes Store, App Store or Apple Books Store.
2. Click the buy button for something you want to purchase. A Touch ID prompt will appear.
3. Place your finger on Touch ID to complete the purchase.

Find Usb Device On Mac

You may be prompted to enter your password on your first purchase or if you've made changes to the fingerprints that you've enrolled in Touch ID.

Use Touch ID for Apple Pay

You can make easy, secure and private purchases on websites using Apple Pay on your Mac. Apple Pay never stores your credit or debit card information and never shares it with the merchant.

Apple Pay is not available in all regions.

Mac Usb Keyboard

Set up Apple Pay

On Mac notebooks with Touch ID, you're prompted to configure Apple Pay during the setup process. If you opt not to set up Apple Pay when you first start up, you can set it up later in the Wallet & Apple Pay section of System Preferences. You can also check your transaction history and manage your payment cards there. For example, you can add or delete cards, and make updates to contact or delivery information.

You can only add payment cards to one user account on your Mac. If you set up Apple Pay in your main user account and then log in under with a different account, Touch ID and Apple Pay will be unavailable. In this situation, you can use an eligible iPhone or Apple Watch to complete Apple Pay transactions that you have started in Safari on your Mac.

Make a purchase in Safari with Apple Pay

On websites that offer Apple Pay, click the Apple Pay button during the checkout process. When prompted, complete the payment by placing your finger lightly on Touch ID.

Turn on, restart, sleep and shut down

Press Touch ID to turn on your MacBook Pro or MacBook Air if it's open and turned off. If your Mac is closed and turned off, simply open it to turn it on.

Unlike with older Mac notebooks, holding down Touch ID on your MacBook Pro or MacBook Air doesn't display a dialogue with options to Sleep, Restart or Shut Down. You can find these options in the Apple menu. If your Mac is unresponsive, you can hold down Touch ID for six seconds to force a shut down. Please note: you'll lose any unsaved work if you do this.

Pressing Touch ID won't put your Mac to sleep. Instead, choose Apple menu  > Sleep. If your Mac has a Touch Bar, you can also add a Sleep button to the Control Strip:

1. Click Finder.
2. Select View > Customise Touch Bar.
3. Touch the Control Strip region of the Touch Bar to switch to Control Strip customisation.
4. Use your pointer to drag items you want, such as the Sleep button, from the main display down into the Touch Bar. You can also drag items left and right within the Touch Bar to rearrange them, or drag them up and out of the Touch Bar to remove them.
5. Tap Done in the Touch Bar or click Done on the screen when you've finished.

Find out more about Touch ID

You can use Touch ID to control accessibility features on your Mac:

• Triple-press Touch ID to display the Accessibility Options window.
• Hold the Command key and triple-press Touch ID to toggle VoiceOver on and off.

In some situations, you will need to enter your password instead of using Touch ID, namely:

• If you've just restarted your Mac
• If you've logged out of your user account
• If your fingerprint isn't recognised five times in a row
• If you haven't unlocked your Mac in more than 48 hours
• If you've just enrolled or deleted fingerprints
  

If you still need help unlocking your Mac with Touch ID, follow these tips. Try again after each one:

• Make sure your fingers are clean and dry.
  Moisture, lotions, sweat, oils, cuts or dry skin might affect fingerprint recognition. Certain activities can also temporarily affect fingerprint recognition, including exercising, showering, swimming or cooking.
• Your finger should completely cover Touch ID. While Touch ID is scanning, don't press down or move your finger.
• Try setting up a different fingerprint.